Yuasa 6N6-1D-2 (DC) 6V Dry Charged Conventional Battery

Dry charged battery, excludes acid pack (available separately). The Conventional battery range is the industry standard for motorcycles and more, with patented separators providing high cranking power.
For box quantities please add multiples of 10.

---

Dry charged battery supplied without acid. Acid packs sold separately (AP500 and AP1000).The Conventional battery range is the industry standard for motorcycles, snowmobiles and ride-on mowers.Features:

• Specifically designed to protect against seepage and corrosion
• Made to withstand vibration
• Patented separators providing high cranking power
• Through-partition construction delivers maximum power while the unique sealed posts resist corrosion for a longer battery life

Installation:Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed type or lithium for batteries that sit at angles.Initial charging: Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.
Failure caused by incorrect activation or charging is not a warranty issue. Further research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use. Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales office
Manufacturer Part No. (MPN): 6N6-1D-2(DC)
Barcode: 5050694005237

Length:	99mm
Width:	57mm
Height:	111mm
CCA:	0
Capacity:	6
Polarity:	leads
Type:	Dry
Voltage:	6v

Fitment Summary
Compatible with 88 models (yearly).

• Kawasaki: AE 50A1, AE 50A2, AE 50A3, AE 50A4, AE 50A5, AE 80 A B1, AE 80 A B2, AE 80 A B3, AE 80 A B4, AE 80 A B5, AE 80 A B6, AE 80 A B7, AE 80 A B8, AE 80 A B9, AR 50A1, AR 50A2, AR 50A3, AR 50A4, AR 50A5, AR 50C1, AR 50C10, AR 50C2, AR 50C3, AR 50C4, AR 50C5, AR 50C6, AR 50C7, AR 50C8, AR 50C9, AR 80A C, KE 125A10, KE 125A11, KE 125A12, KE 125A13, KE 125A14, KE 125A15, KE 125A16, KE 125A17, KE 125A18, KE 125A19, KE 125A20, KE 125A3, KE 125A4, KE 125A5, KE 125A6, KE 125A7, KE 125A8, KE 125A9, KE 175B, KE 175D, KE 250B1, KE 250B2, KH 125A1, KH 125A2, KH 125A3, KH 125A4, KL 250A C, KS 125, KV 250, Z 125BR, Z 125 Ninja