Yuasa 6N6-3B (DC) 6V Dry Charged Conventional Battery

Dry charged battery, excludes acid pack (available separately). The Conventional battery range is the industry standard for motorcycles and more, with patented separators providing high cranking power.
For box quantities please add multiples of 20.

---

Dry charged battery supplied without acid. Acid packs sold separately (AP500 and AP1000).The Conventional battery range is the industry standard for motorcycles, snowmobiles and ride-on mowers.Features:

• Specifically designed to protect against seepage and corrosion
• Made to withstand vibration
• Patented separators providing high cranking power
• Through-partition construction delivers maximum power while the unique sealed posts resist corrosion for a longer battery life

Installation:Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed type or lithium for batteries that sit at angles.Initial charging: Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.
Failure caused by incorrect activation or charging is not a warranty issue. Further research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use. Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales office
Manufacturer Part No. (MPN): 6N6-3B(DC)
Barcode: 5050694007156

Length:	99mm
Width:	57mm
Height:	111mm
CCA:	0
Capacity:	6
Polarity:	minus/plus
Type:	Dry
Voltage:	6v

Fitment Summary
Compatible with 168 models (yearly).

• Honda: CB100 K0, CB100 K1, CB100 K2, CB100 K3, CB100 N NA, CB125 J, CB125 S, CB125 T2, CBX125 , CL100 K0, CL100 K1, CL100 K2, CM9090 OHV, CRF100 F4, CRF100 F5, CRF100 F6, CRF100 F7, CRF100 F8, CRF100 F9, CRF100 FA, CRF100 FB, CRF100 FC, CRF100 FD, CT20090 Trail, MT125 Elsinore Trail, S90 Sport, SL125 Motosport, XL350 K
• Kawasaki: KH 100A, KH 100G, KH 125A5, KH 125K1, KH 125K2, KH 125K3, KH 125K4, KH 125K5
• Yamaha: DT 125A, DT 125C, DT 125MX, DT 125V, DT 175A, DT 175B, DT 175C, DT 175D, DT 175E, DT 175F, DT 175G, DT 175H, DT 175J, DT 175K, DT 175L, DT 175M, DT 175MX, DT 175N, DT 175T, DT 175W, DT 175X, DT 175Y, DT 175Z, DT 250D, DT 250MX, DT 400MX, MX 360 Comp, TT 500D, TT 500E, TT 500F, TT 500G, TT 500H, TT 500J, XT 250 3Y3 4Y0, XT 500B, XT 500C, XT 500D, XT 500E, XT 500F, XT 500G, XT 500H, XT 500J, XT 500K, XT 500L, XT 500M, YT 175 Tri Moto