Yuasa 12N7B-3A (DC) 12V Dry Charged Conventional Battery

Dry charged battery, excludes acid pack (available separately). The Conventional battery range is the industry standard for motorcycles and more, with patented separators providing high cranking power.
For box quantities please add multiples of 5.

---

Dry charged battery supplied without acid. Acid packs sold separately (AP500 and AP1000).The Conventional battery range is the industry standard for motorcycles, snowmobiles and ride-on mowers.Features:

• Specifically designed to protect against seepage and corrosion
• Made to withstand vibration
• Patented separators providing high cranking power
• Through-partition construction delivers maximum power while the unique sealed posts resist corrosion for a longer battery life

Installation:Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed type or lithium for batteries that sit at angles.Initial charging: Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.
Failure caused by incorrect activation or charging is not a warranty issue. Further research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use. Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales office
Manufacturer Part No. (MPN): 12N7B-3A(DC)
Barcode: 5050694007231

Length:	150mm
Width:	62mm
Height:	130mm
CCA:	70
Capacity:	7.4
Polarity:	minus/plus
Type:	Dry
Voltage:	12v

Fitment Summary
Compatible with 382 models (yearly).

• Aermacchi HD: Aletta Scrambler 125, Deluxe 125, GT 250 Ala Blue, GT 350, GT 350 Sprint, R/C 125, SX 350, TV 350
• Aspes: Duma 125
• BSA: SR 400 Gold
• Cagiva: MXR 400, SXT 125, WMX 250
• Garelli: TSR 125
• Gilera: HX 125LC
• Harley-Davidson: ST 175
• Harley-Davidson AMF: SS 125, SS 175, SS 250, SS 350, SST 125, SST 250, SST 350, SX 125, SX 175, SX 250, SX 350, SXT 125
• Honda: CBX200 Strada, CTX200 A, CTX200 B
• Hyosung: Cruise 125, Grand Prix 125, GS 125
• Jialing: JLR 125
• Kreidler: Florett 80, Mustang 80
• Lexmoto: Assault 125
• MBK: XN 125 Doodo, XN 150 Doodo, XQ 125 Thunder, XQ 150 Thunder, YP 125 Skyliner, YP 180 Skyliner
• Pegasus: Corona 1254t, Corona 125 Comfort, Corona 125 Sport Edition
• Peugeot: Elystar 50, Looxor 50, Looxor 50 TSDi, Looxor 50 TSDi injection
• Suzuki: RV 125 Van Van
• TM Racing: MX 450F, MX 450Fi, SM 450F, SMX 450Fi
• Triumph: Bonneville 650 T120 R
• Yamaha: DT 125E F, SR 125, SR 125SE, SR 400 3HT1, SR 400 BC-RH01J, SR 500 Classic, XC 150 Fly One, XN 125 Teos, XN 150 DooDo, XN 150 Teo's, XQ 125N, XQ 150 Maxster, YFM 100A, YFM 100B, YFM 100T, YFM 100U, YFM 100W, YFM 50RV, YFM 50RW, YFM 50S, YFM 50T, YFM 80D, YFM 80E, YFM 80F, YFM 80G, YFM 80GT, YFM 80GV, YFM 80GW, YFM 80GX, YFM 80GY, YFM 80GZ, YFM 80H, YFM 80J, YFM 80K, YFM 80L, YFM 80MX, YFM 80N, YFM 80RT, YFM 80RV, YFM 80RW, YFM 80RX, YFM 80S, YFM 80WP, YFM 80WR, YFM 80WS, YFM 80WT, YP 125 Majesty, YP 125 Majesty SE06, YP 150 Majesty, YP 180 Majesty
• Zongshen: GV 125, Icon 125, LZX 125 Flash, Terra 125